Heat Pipe Technology, Inc

HPT Archived Webinars - Selection Software, SelectPlus Training

HPT Case study


SelectPlus™ Training – Selecting our Wrap-Around

This webinar focuses on designing and selecting our controllable and non-controllable DHP-U™ models using SelectPlus™ Design Software. The topics covered in the webinar are:

  • What are heat pipes
  • What is a DHP-U™?
  • Selection examples that include controllable and non-controllable units
  • Things to look out for when selecting U-frames
  • Savings using the accurate temperature bins method
  • Tips and shortcuts

(Webinar-20170629)

Click here to watch video

HPT Case study


SelectPlus™ Training – Selecting Dehumidification Heat Pipes (II)

This webinar video will start with the basics of the wrap-around heat pipe. It will compare the old approach of the costly overcool/reheat and offer the alternative wrap-around heat pipe solution. In addition, it will discuss how the wrap-around heat pipe will help meet various ASHRAE Standards including both ASHRAE Standard 62.1 2013, as well as ASHARE Standard 90.1 2013. The training goes through 3 examples which go through 3 different applications of the technology. These include an AHU using reheat, neutral air, and downsizing DX equipment with the wrap-around. Throughout, users are shown how to select, output reports, run economic analysis, and other tips/tricks. (Webinar-20160707)

Click here to watch video

HPT Case study


SelectPlus™ Training – Selecting Dehumidification Heat Pipes (I)

This webinar video will start with the basics of the wrap-around heat pipe. It will compare the old approach of the costly overcool/reheat and offer the alternative wrap-around heat pipe solution. From there our online software is introduced, which users are walked through on how to select, output reports, run economic analysis, edit drawings, etc. It goes through the entire process, in addition to showing some tips/tricks to make the selection even easier. (Webinar-20151027)

Click here to watch video