HPT is Unveiling a New Smart Water-Glycol Recovery System at the Upcoming AHR Expo in Atlanta

Heat Pipe Technology (HPT) is proud to announce the introduction of a new Smart Water-Glycol system with effectiveness exceeding 50%.

The system is the latest in HPT's line up of optimized and energy efficient recovery products, offering the ultimate cross-contamination-free system with huge capabilities. It will be capable of both summer and winter recovery, as well as process applications and recover energy between air streams that are up to 200 feet. It will also feature a user-friendly control interface that will give customers the ability to adjust system parameters and instantly access real-time system performance.

Besides its versatility and affordability, it comes with a 5-year warranty, can handle up to 100,000 CFMs per system, and it also comes with the following features:

  • One stop system design & supply
  • Greater than 50% effectiveness
  • Coils designed for energy recovery
  • Integrated control system with modulation
  • BAS interface through BACnet/Modbus
  • Modular design for easy install

For more information, please contact us by email at info@heatpipe.com. You can also call our main business line at 813-470-4250.

 

Learn More >>

 

HPT to Exhibit at the 2019 AHR EXPO in Atlanta

HPT will be exhibiting at the upcoming 2019 AHR Expo in Atlanta, GA. We are excited to showcase our latest innovations in the area of energy recovery and dehumidification. One new product is the above mentioned Smart Water-Glycol Energy Recovery System. This product will have performance comparable to our energy recovery heat pipes, and will be able to handle large CFM systems, greater separation between air streams, and two season recovery.

HPT will also be displaying live interactive demo units for our various other products that will give instance performance calculations and allows users to feel the temperature difference created from our energy recovery products.

Please come see us at Booth No. 4229. For more information, please click the link below.

 

2019 AHR EXPO >>

 

Project Focus

Cross-Contamination-Free Split Passive Heat Pipes in Large University Research Laboratory

HPT recently heard back from a customer of the huge success of a split-passive energy recovery heat pipe that was installed in two large AHU's that serviced a Bio-science Laboratory at a major university in Arizona. The science laboratory focused on interdisciplinary research in health science for human health, aging, and disease and had 100,000 sq ft of biomedical office space.

The heat pipes were installed in two large custom AHU's totaling 93,000 CFM's. Each AHU utilized energy recovery heat pipes arrayed in a staggered formation in the air stream. At the summer design condition, the heat pipes were designed to precool the entering air down from 112°F DB to 91°F DB, offering 116 tons of precooling while the CC offered 591 tons to bring the air down to 49°F DB. At the winter design condition, the split-passive heat pipes were designed to preheat the air from 32°F DB to 52°F DB, offering 71 MMBtu/hr of energy savings.

For more information, please click the link below or contact us by email at info@heatpipe.com. You can also call our main business line at 813-470-4250.

Learn more »

 

 

Wrap-Around Heat Pipes (DHP)

Wrap-Around heat pipes can save energy and enhanced dehumidification either by replacing or minimizing the expensive reheat, or by reducing the load on the cooling coil. To learn more about the features and benefits of this product, please follow the link below.

Learn More »

 

 

 

Side-by-side Energy Recovery (HRM)

HPT's Energy Recovery Heat Pipes are an economical passive, and reliable energy recovery device capable of recovering energy during both heating and cooling seasons. To learn more about the features and benefits of this product, please follow the link below.

Learn More »

SelectPlus Design Software

HPT's powerful web-based selection software allows user 24/7 access to our product's performance, economic analysis, and more. Please click below to request an account.

Account Request »

 

AHRI Certified and ETL Listed

HPT is both AHRI certified to AHRI Std 1060 for our air-to-air heat exchangers and ETL Listed to UL Std 207 and CSA Std C22.2#140.3 for all of our existing products.

Learn More »

This newsletter is a service of HPT, Inc. It is meant to familiarize users with Heat Pipe Technology, and how to select heat pipe systems using SelectPlus™ design software.